General Tips on Swimming Pool Cleaners and Maintenance
It is very important that you take good care of your swimming pool, naturally you should make sure that the water are safe, and match the level of maintenance to the level of usage.
Since there is little chance you could predict your pool use it is recommended that you do this regularly.
You will want to test the swimming pool water in the evening. Check the water before you add any kind of chemicals to the pools water. Once tested you should also test the water in the morning, before anyone uses the pool so you know that the water quality is good for the days activities. A PH level of 7.5 is probably best, that is considered to be the ideal level for swimming pool water.
Test the swimming pool water according to usage, if you use the pool every few days there is no reason for daily checks, just before you intend on using it. At some seasons the swimming pool is used more than at other seasons so make sure you adjust your pool cleaning and maintenance to the seasons and your pool usage.
Make sure you check the pool in advance to ensure a safe and enjoyable pool. Check signs of poor water quality, in general swimming pool water should be clear and bleu, anything that is not blue and clear is a cause for concern and you should simply take a close look at the water to make sure there is no algae growth or cloudiness.
Pay attention to the weather, different weather conditions have a significant effect on the water quality and the pool cleanness. The weather conditions effect the swimming pool water quality too, strong sun reduces amounts of chlorine and rainy seasons may increase water lever or introduce parasites to the pool.
You should consider checking the water at the return flow of water to the pool, check and add any chemicals to ensure that there is effective mixing with filtered water. Regularly clean the pool surfaces including the waterline to ensure that build up of sun-oils, body fats, algae, airborne pollution and other dirt is not left to build up. Pool surround paving slabs should be cleaned with a strong Chlorine solution, brushed away from the pool.
While pool cleaning and pool maintenance is something that seems to be simple and not complicated it is highly recommended that you study the manufactures instructions, and that you consult the manual whenever faced with problems, you can also call and ask the company for advice or consult a local Tampa swimming pool maintenance professional.
Chemical agents need to be mixed with the pools water, it is strongly recommended that you read instructions carefully and make sure you mix the right amounts, be careful and use caution when dealing with chemicals, use gloves and do not inhale fumes. The pool cleaning products and chemicals should be kept away from the reach of children always, and when disposed off it should be done by a responsible adult.
If you follow all the instructions and common sense there is no reason that you will not enjoy a nice and clean swimming pool at all seasons, it is always better to know that its highly maintained and cleaned when you jump into the cool water of your swimming pool.
Avoid smoking or lighting fire close to chemicals, and keep the chemicals in a safe location, as far as possible from barbecue grills, fireplaces etc. after handling pool cleaning products wash hands thoroughly.
Swimming Pool Cleaners Advice – If chemicals get into any contact with skin or inhaled, call a poison center, and make sure you can provide all the details of the chemicals used (find the container and keep it with you).
To ensure that your pool water are clean run these tests on a daily basis, PH and Chlorine levels using a test kit. Ensure pH is within the 7.2 – 7.6 range. The pool filter should run at least 8 to 10 hours per day (24 hours per day is best). Set your pool timer or remember to run the pool manually if you don’t have a timer. If you are not running your pool 24 hours per day, it is best to have it running during the daylight hours (instead of night).
Make sure your skimmer baskets are empty and clear of leaves or other debris. Chlorine must be added to the pool daily by dissolving chlorine tablets in the skimmers once per week or use an automatic chlorinator.
Make sure the unit is full and that the dial is set to a level that gives you a good daily chlorine reading depending on how long you run your system.